Online Continuous Effluent Monitoring System

Measuring Method

Dual beam absorbance method ( UV254nm & 365nm)

Measuring Way

Immersion measurement

Measured Parameters

COD, BOD(TOC), TSS(Turbidity), Water Temperature

Measuring Range

COD: 3000mg/L, BOD: 1500mg/L(TOC: 1500mg/L),

TSS: 3000mg/L(Turbidity: 3000NTU), water temperature: 50℃

Measuring Accuracy

COD: < 5%; TOC: < 5%; Turbidity: < 3%; Water

Temperature: 0 .2℃

Resolution

COD: 0 .01 mg/L; TOC: 0.1mg/L; Turbidity: 0.1NTU;

Water Temperature: 0.1℃

Cleaning system

Automatic cleaning with cleaning brush

Power Supply Voltage

12±5%VDC, current: <50mA (without cleaning brush)

Communication Methods

RS485, Modbus protocol

Protection level

IP68, Maximum water depth in 10m

Highest Bearing Pressure

1bar

Cable Length

5 or 10 meters

Overall Dimensions

214mm×φ50mm

Probe Weight

665g

Shell Material

POM and 316L

Online SPM Analyzer Make: EES

Model: - EE-SPM-01

(Opacity Based Technology) Analyzer Features:

·        In site measurement.

·        Modulated high intensity, high reliability green LED source for long lifetime stability and immunity to ambient light.

·        Transmitted light beam is pulsed to give complete immunity to ambient light levels.

·        Receiver has on board temperature measurement to provide stability over temperature.

·        Rugged SS316 construction.

·        Software for PC based software for setup, control and data logging.

·        Standard single pass measurement technique with transmitter/ receiver arrangement.

·        No moving parts.

·        Rugged design.

·        TX and RX heads supplied with air purge body.

·        Easily cleanable

·        Both the TX and RX are supplied with air purge body. Air purge keeps contaminated stack gas away from lens surfaces.

·        Inbuilt data logger for data storage Stack gas Analyzer features

·        Ranges Display: Auto-ranging 0-1000ppm

·        Resolution: 0.01ppm

·        Analogue out: 4-20mA

·        Temperature Range: 200oC to 500oC

·        Relative Humidity: 0% to 80% non- Condensing.

Sample flow rate: 3 to 5 LPM

·        Digital output: Multidrop RS232 port shared between analyzers for data, status and control. USB port DB50 with discrete status, user controls and analogue output

Client Scope- UPS Power Supply , Instrument air for purging, 

Measuring Method

Dual beam absorbance method ( UV254nm & 365nm)

Measuring Way

Immersion measurement

Measured Parameters

COD, BOD(TOC), TSS(Turbidity), Water Temperature

Measuring Range

COD: 3000mg/L, BOD: 1500mg/L(TOC: 1500mg/L),

TSS: 3000mg/L(Turbidity: 3000NTU), water temperature: 50℃

Measuring Accuracy

COD: < 5%; TOC: < 5%; Turbidity: < 3%; Water

Temperature: 0 .2℃

Resolution

COD: 0 .01 mg/L; TOC: 0.1mg/L; Turbidity: 0.1NTU;

Water Temperature: 0.1℃

Cleaning system

Automatic cleaning with cleaning brush

Power Supply Voltage

12±5%VDC, current: <50mA (without cleaning brush)

Communication Methods

RS485, Modbus protocol

Protection level

IP68, Maximum water depth in 10m

Highest Bearing Pressure

1bar

Cable Length

5 or 10 meters

Overall Dimensions

214mm×φ50mm

Probe Weight

665g

Shell Material

POM and 316L